Anycubic Kobra S1 ACE 2 Pro Combo
Anycubic Kobra S1 ACE 2 Pro Combo
Key Features of Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer
- Anycubic Kobra S1 ACE 2 Pro Combo enables multi-colour 3D printing in 4 or 16 colours
- Fully enclosed CoreXY design ensures stable printing even at high speeds
- The Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer offers very quiet operation with up to 44 dB of noise in silent mode
- Active filament drying improves print quality even with more demanding materials
- 250 × 250 × 250 mm print space allows 3D printing of larger models without the need to cut them up
- The Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer achieves extreme print speeds of up to 600 mm/s with acceleration of 20,000 mm/s²
- Automatic alignment of the LeviQ 3.0 pad ensures a perfect first layer
- Full metal quick-change hotend provides a maximum temperature of up to 320 °C
- Anycubic Kobra S1 ACE 2 Pro Combo features an out-of-filament sensor with automatic print pause
- Anycubic Kobra S1 ACE 2 Pro Combo supports 3D printing from PLA / PETG / TPU / ABS / ASA filaments
- Minimal assembly required the Anycubic Kobra S1 ACE 2 Pro Combo 3D printer is ready to use in 15 minutes out of the box
- Use Anycubic to control the printer remotely
- Anycubic Kobra S1 ACE 2 Pro Combo is compatible with Anycubic Slicer Next ecosystem
Anycubic Kobra S1 ACE 2 Pro Combo
Multi-colour FDM 3D printer with closed design
The Anycubic Kobra S1 ACE 2 Pro Combo is a modern FDM 3D printer with a closed design and advanced filament system that allows you to print fast, quiet and multi-colour in up to 16 colours without the need for complicated setup. With high print speeds of up to 600 mm/s and acceleration of 20,000 mm/s², the Anycubic Kobra S1 ACE 2 Pro Combo can handle prototypes and finished models in record time, while the 250 x 250 x 250 mm print space ensures you have plenty of room to 3D print larger models and more complex projects without having to cut them up. A smooth start to every print is assured by the enhanced LeviQ 3.0 auto-alignment pad, which supports Z-offset and ensures perfect first layer adhesion. The Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer is equipped with active filament drying, allowing you to print stably even from more demanding materials without the risk of cracking or unevenness. The full metal quick-change hotend with a maximum temperature of up to 320°C is clog-resistant and allows you to 3D print a wide range of materials including PLA, PETG, TPU, ABS and ASA. You'll enjoy ultra-quiet operation with up to 44dB of noise, intelligent features like AI print error detection, power failure recovery and a clear 4.3″ touchscreen. The Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer is ready to print in just 15 minutes out of the box, and thanks to the Anycubic Slicer Next connection and mobile app, it gives you full control over 3D printing at home and remotely. This makes it the ideal 3D printer for makers, designers and enthusiasts who want to print quickly, colourfully and quietly.
Multi-colour 3D printing in 4 colours
The Anycubic Kobra S1 ACE 2 Pro Combo supports multi-colour 3D printing, allowing you to create colour-rich and visually striking models without manually changing materials. The printer works with 4 colours, and you can expand the ACE 2 Pro module up to 16 colours, which you'll appreciate when printing decorations, prototypes and detailed design models. You get professional-looking results straight from a single print job.
Active filament drying for stable print quality
With active filament drying, the Anycubic Kobra S1 ACE 2 Pro Combo 3D printer keeps the material in optimal condition throughout the printing process. Thanks to controlled moisture wicking, the risk of cracking, uneven extrusion or poor layer adhesion is significantly reduced, which is especially appreciated when using more sensitive filaments. Active filament drying contributes to a better surface finish on models even on long print jobs.
Automatic bed alignment ensures higher printing success
The enhanced LeviQ 3.0 Auto Pad Alignment System ensures you can accurately adjust the print area without the need for manual intervention. Thanks to a more stable Y-axis, high-quality X-axis bearings, and intelligent calibration, the printer automatically adapts to substrate irregularities and ensures optimal nozzle-to-surface distance. The result is a reliable first layer, better model adhesion and significantly higher printing success right from the first start.
Fully enclosed CoreXY design for stable printing
The Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer uses a fully enclosed CoreXY design to ensure high mechanical stability, precise motion control and consistent print quality even at high speeds. The enclosed print area helps maintain stable temperature conditions inside the printer, which is especially appreciated when printing from materials such as ABS or ASA, and will contribute to better layer adhesion and overall print quality. You'll be able to print quickly and smoothly, with minimal vibration and no loss of accuracy.
3D printer compatible with the most commonly used filaments
With Anycubic Kobra S1 ACE 2 Pro Combo you can work with most commonly used filaments without limitations. The 3D printer is compatible with PLA materials, PETG, TPU, ABS and ASA allowing you to print both detailed decorative models, such as rigid functional parts or flexible components. You get the freedom to choose the material for your creative and technical projects.
AI Spaghetti Detection for print protection and material savings
AI Spaghetti Detection automatically detects print failures, such as unwanted spaghetti, using intelligent algorithms. The Anycubic Kobra S1 ACE 2 Pro Combo can provide early warning or intervention to help prevent filament waste, damage to the model in progress, and unnecessary load on the printer. It brings greater confidence of successful printing, less waste and greater peace of mind, especially for long or large-format print jobs.
Improved nozzle minimizes filament leakage
The Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer features a quick-change hotend with a maximum temperature of up to 320°C, allowing for easy maintenance and quick changeovers without unnecessary downtime. The nozzle uses a ceramic composite aerospace-grade throat tube, which ensures stable heat conduction, smooth filament flow and high durability even under long-term load.
High print volume for creative projects
Anycubic Kobra 3 S1 ACE 2 Pro Combo will give you enough space to realize your ideas.
Quiet operation suitable for home and office
Thanks to its very quiet operation, you will appreciate the Anycubic Kobra S1 ACE 2 Pro Combo in everyday use at home and in the office. In standard print mode, it reaches noise levels as low as 46dB, while quiet mode reduces noise levels to 44dB without compromising print quality. Thanks to the low noise level, you can operate the 3D printer in living spaces or while working without disturbing your concentration or rest.
Automatic settings for fast print start
With minimal installation required, the Anycubic Kobra S1 ACE 2 Pro Combo 3D Printer is ready to use in just 15 minutes out of the box, which is appreciated by beginners and experienced users alike. Intelligent assistance features guide you step-by-step through initial setup, automatic calibration and printing, reducing the risk of errors and ensuring every print job runs smoothly.
Print speeds up to 600 mm/sec ensure maximum productivity
The Anycubic Kobra S1 ACE 2 Pro Combo achieves a maximum print speed of up to 600 mm/s, which significantly reduces printing time compared to conventional FDM printers. The high speed combined with a maximum acceleration of 20,000 mm/s² allows you to quickly produce prototypes and finished models without unnecessary downtime, while the printer maintains accuracy and quality of detail.
Anycubic ecosystem enables convenient 3D printing
The Anycubic ecosystem integrates the Anycubic Kobra S1 ACE 2 Pro Combo 3D printer, software and mobile app into one clear environment. With Anycubic Slicer Next, you can easily prepare print data with optimized profiles, while the mobile app gives you remote control, real-time print monitoring and an overview of the progress and history of print jobs. So you have full control over your printing at home and remotely.
Multi-colour 3D printing in up to 16 colours with the new ACE 2 Pro
The Anycubic Kobra S1 ACE 2 Pro Combo opens the door to a world of truly creative 3D printing with the advanced ACE 2 Pro system, which allows you to print in 4 colours in the basic configuration and up to 16 colours when expanded. You can create detailed multi-colour models without having to manually change filaments, which greatly simplifies the process and saves you time. With intelligent filament feed control, seamless colour switching and optimized workflow, the Anycubic Kobra S1 ACE 2 Pro Combo can handle even complex colour projects with minimal material waste and maximum accuracy. Whether you're creating design objects, figures or functional models, the ACE 2 Pro module takes your creativity to the next level.
Smooth filament feeding
The advanced filament feeding system with four independent brushless motors ensures the smoothest possible flow of each print, ensuring accurate dispensing and smooth material changeovers without jamming. Thanks to the modern buffering mechanism, the Anycubic Kobra S1 ACE 2 Pro Combo works stably even in demanding multi-colour projects.
Active and passive humidity control
Built-in sensors continuously monitor temperature and humidity in real time, allowing the Anycubic Kobra S1 ACE 2 Pro Combo to automatically respond to changes in conditions during printing. The solenoid valve actively wicks away excess moisture and keeps the filament dry, while the silicone seal prevents moisture from penetrating the environment. This gives you consistent results without cracking, bubbling or loss of quality.
On-board intelligent assistant
Anycubic Kobra S1 ACE 2 Pro Combo can estimate the remaining filament quantity and display it clearly on the screen. If the filament runs out, the printer will automatically resume printing when it is replenished with preset profiles for colours and materials. There is also intelligent filament identification that automatically detects the parameters of compatible Anycubic filaments.
Package contents:
3D printer Anycubic Kobra S1
Anycubic colour Engine Pro (ACE 2 Pro)
Filament spool holder Signal cable
4× Filament tubes
Mounting screws: M3 × 6 (2 ×) M2,5 × 25 (2 ×)
Lubricant
Allen wrench set (1.5 / 2.0 / 2.5 mm)
Nozzle cleaner
Filament sample
2× Power Cables
Active carbon filter
Anti-blocking module
Silicone nozzle cover
2× Cable organizers
Nozzle cleaning module
Specifications
3D printing technology
Print material properties
Printing area
Layer thickness
Max. recommended print speed
Print options
Printer type
Number of heads
Display
Power outlet type
| Code: | ANYC260401 |
| Warranty: | 24 months |
| Links: | Producer's Website: |