APC Back-UPS 1050VA 8 French outlets

The APC Back-UPS 1050VA uninterruptible power supply with eight French sockets provides reliable protection for home electronics and small office setups. It operates with an energy-saving off-line topology, which achieves a high efficiency of 99.1% during normal operation. With a total apparent power of 1050VA and a real power of 600W, it provides enough capacity to power computers, network components or games consoles. This APC UPS for home and office also integrates Automatic Voltage Regulation (AVR), which stabilises network fluctuations without having to switch to battery power. The comprehensive APC surge protection protects connected devices not only from complete outages, but also from voltage spikes.

Performance and backup capabilities

The off-line APC Back-UPS 1050VA uninterruptible power supply delivers a real power of 600W with an apparent power of 1050VA. The off-line (standby) topology contributes to a high energy efficiency of 99.1% at full load, as the current flows directly from the mains in normal mode. During a power failure, the unit switches to battery operation. Backup time is a key parameter; at full load, it powers devices for 104 minutes, while at half load (300W), the time extends to 464 minutes, providing plenty of time to save work and safely shut down systems.

Design and device protection

The integrated surge protection of the APC Back-UPS 1050VA uninterruptible power supply absorbs up to 310J of energy and is complemented by data line protection (RJ-45) for network cables. In addition, the Automatic Voltage Regulation (AVR) function corrects undervoltage and overvoltage without unnecessarily draining the battery, thereby extending its life. The compact design, with dimensions of 120×130×365mm and a weight of 4.4kg, allows for flexible installation. The unit can be placed on the floor under a desk or mounted on a wall to save space. The low operating noise level does not exceed 45dBA, which corresponds to a quiet environment. It operates reliably in a temperature range of 0 to 40°C.

Battery and management options

The heart of the APC Back-UPS 1050VA unit is a lead-acid RBC17 battery, which takes approximately 6 hours to fully charge. An important feature is that it can be easily replaced by the user, which simplifies maintenance and extends the overall life of the device. The battery is protected against deep discharge as standard. For basic monitoring of the UPS and power status, it supports the USB HID communication interface, which works in modern operating systems without the need to install additional software.

Connectivity and sockets

The APC Back-UPS 1050VA uninterruptible power supply offers a wide range of connection options for your devices. It is equipped with a total of eight French-type output sockets. Six of them provide full battery backup and surge protection, while the remaining two sockets offer surge protection only, which is ideal for less critical peripheral devices. Two practical USB ports are available for charging mobile phones, tablets and other personal electronics.