APC Smart-UPS T Lithium-ion 750VA 2U
APC Smart-UPS T Lithium-ion 750VA 2U
The APC Smart-UPS T Lithium-ion 750VA 2U is a line-interactive UPS designed to protect servers, network components and other critical IT infrastructure. It provides a true power output of 600W with a pure sine wave output, which is essential for the stable operation of sensitive electronics. This UPS uses a lithium-ion battery that offers a lifespan of 8 to 10 years and reduces charging time to just 3 hours. At full load, it powers devices for 6 minutes and 10 seconds, while at half load, this extends to 12 minutes and 56 seconds. Its compact 2U design with a short depth of 318mm makes it easy to install in rack cabinets and simplifies cable management.
Key features of the APC Smart-UPS T Lithium-ion 750VA 2U
- Line-interactive topology with Automatic Voltage Regulation (AVR)
- Lithium-ion battery with a lifespan of 8 to 10 years
- Short-depth design for easy rack installation
- Remote cloud monitoring via the SmartConnect port
- Pure sine wave output for sensitive electronics
- Expandable with a network card for advanced management
- Six battery-backed IEC C13 output sockets
- Integrated surge protection and noise filtering
Performance and topology
The UPS operates with a line-interactive topology that uses Automatic Voltage Regulation (AVR). This feature stabilises fluctuating voltage without switching to battery power, thereby preserving the battery. Efficiency at full load reaches 98.2%. The device provides a backup time of up to 12 minutes and 56 seconds, giving you plenty of time to save your work and safely shut down systems.
Battery and protection features
Inside, it contains a replaceable lithium-ion battery with a lifespan of 8 to 10 years, which reduces total maintenance costs. A full battery charge takes approximately 3 hours. To protect connected equipment, it integrates surge protection with energy absorption and full noise filtering. Deep discharge protection helps to extend battery life.
Remote management and software
For management and monitoring, it provides USB, RS-232, and Ethernet communication interfaces via the SmartConnect port. This gives you access to a cloud portal for remotely monitoring the UPS status, performing firmware updates, and receiving notifications. For advanced management, it supports an optional Network Management Card, which, combined with PowerChute Network Shutdown software, enables graceful shutdown of servers and virtual machines.
Connectivity and sockets
Input power is connected via an IEC C14 connector. For powering connected devices, there are six IEC C13 sockets and two IEC Jumper cables available.
Technical specification
- Frequency bands: 50–60Hz
- Ports: 1× IEC 60320 C14, 6× IEC 60320 C13, 1× USB, 1× serial port (RS-232), 1× SmartConnect Ethernet (RJ-45), 1× SmartSlot (expansion slot for communication card)
- Protection: Surge protection, noise filtering, deep discharge protection
- Operating modes: Line-interactive
- Operating temperature: 0–40°C
Specifications
Performance
Efficiency
Backup time
Power outlet type
Output type
For rack
Features
Dimensions
Weight
| Code: | NZ475b45 |
| Warranty: | 60 months |
| Links: | Producer's Website: |
| Manufacturer information |
Schneider Electric IT Logistics Europe Limited City East Business Park, Ballybrit Galway, Ireland, [email protected], +19789304141 
|