ARCTIC P14 Pro A-RGB Value pack (3pcs)
ARCTIC P14 Pro A-RGB Value pack (3pcs)
The ARCTIC P14 Pro A-RGB PC fan set, in a three-pack, combines high cooling performance with addressable backlighting. The manufacturer designed these fans for situations requiring high static pressure. The blade design is optimised for a focused airflow, which is key for efficient cooling through water cooling radiators or dense dust filters. A wide speed range with a passive mode under low load complements its overall functionality.
Key features of the ARCTIC P14 Pro A-RGB Value pack (3pcs) PC fan
- High static pressure for efficient airflow through radiators
- Speed range from 400 to 2500 rpm
- Stops completely with a PWM signal below 5%
- Fluid dynamic bearings reduce operating noise and friction
- Each fan contains 12 individually controllable A-RGB diodes
- PWM Sharing Technology for synchronising the speed of multiple fans
- Connectors support both power and A-RGB signal daisy-chaining
ARCTIC P14 Pro and performance for radiators
The fans generate 5.2mmH2O of static pressure, which pushes air even through dense radiator fins or high-resistance dust filters. The minimal gap between the blade tips and the frame also contributes to this ability. The optimised design of the five wide blades directs the airflow with limited turbulence, which increases cooling performance and helps dissipate heat from key components.
Quiet operation and low vibration
Hydrodynamic bearings (FDB) with an extended shaft improve pressure distribution, stabilising rotation and reducing vibration. Automated two-level rotor balancing applies balancing weights with high precision, further contributing to smooth and quiet operation across the entire speed spectrum. The reduction in friction and mechanical wear has a positive effect on the fan's lifespan.
Advanced motor control for the ARCTIC P14 Pro fan
An integrated microcontroller actively reduces motor noise at low speeds while balancing load fluctuations for smoother operation. The electronics are protected against current surges and reverse polarity. The fans operate in a range of 400 to 2500 revolutions per minute and their control is fully automatic. At a PWM signal below 5%, the 0 rpm mode is activated, where the fans stop completely and operate passively.
Addressable backlighting for the ARCTIC P14 Pro fan
Each fan contains twelve second-generation addressable A-RGB LEDs that light up individually and independently of the fan speed. The backlighting is compatible with the synchronisation technologies of leading motherboard manufacturers, which simplifies its integration into an existing system. Lighting effects can thus be easily unified with other components.
Easy daisy-chaining and synchronisation
PST (PWM Sharing Technology) simplifies cable management and control. It lets you connect multiple fans in series and control their speeds synchronously via a single 4-pin PWM connector on the motherboard. The same daisy-chain principle also applies to the 3-pin A-RGB connectors, which makes it easier to connect the backlighting and keeps the case tidy.
Maximum speed:
2500 rpm
Airflow:
110 CFM
Static pressure:
5.2 mmH2O
Bearing type:
Fluid Dynamic Bearing
Connector:
4-pin PWM
Fan size:
140 mm
Package:
3 pcs
Speed range:
400 to 2500 rpm
Number of LEDs:
12 second-generation addressable A-RGB LEDs per fan
Specifications
Backlight
Fan speed
Technical specification
Dimensions
Pack
Connectors
| Code: | CBp14p1 |
| Warranty: | 72 months |
| Links: | Producer's Website: |