ASUS F1A75

Motherboard with a new chipset AMD A75 and supports the latest Socket FM1 series APU AMD and AMD's forthcoming and only known E2 rather codenamed Llano and begun.A75 is based on the concept of FMX, which means that in reality is only the south bridge.North bridge is fully integrated into the compatible processors.A75 is historically the first chipset that natively supports USB third0!There is also support for SATA III (6 Gbit/s) RAID 0/1/10, support for HD audio controller, an SD memory card and support for hard drives with a capacity of 2.2 TB and more UEFI BIOS in the system.
When constructing the model was used technology Asus Protect 3rd0 EPU chip comprising an integrated, surge protection Anti-Surge, the concept of low-peak EMI capacitors with conductive polymer, which are characterized by their durability and improved heat resistance.There is also a set of practical features including Al Suite II, TurboV, MemOK!.Of course there is invigorated after implementation of the UEFI BIOS superstructure.
The board is intended for individuals who do not plan to use only integrated graphics chip hidden in a compatible AMD Llano, since it does not have built-in outputs.However, it is supported by AMD Dual Graphics, which is a hybrid CrossFireX involvement when it is possible to iGPU discrete graphics card from AMD HD series 6000thIgnition of computer game players will then have the opportunity to install two graphics cards directly under the baton of AMD CrossFireX technology.
Specifications:
Supported processors:
Series:AMD A/E2
Base:AMD FM1
Chipset:
AMD A75 (Hudson D3)
Memory:
Type:DDR3
Slot:4x DIMM
Frequency:* 1066/1333/1600/1866 MHz
Connection mode:Dual-channel
Max.capacity:64 gigabytes
Expansion Slots:
1x PCI Express 2nd0 x16 (x16)
1x PCI Express 2nd0 x16 (x4)
2x PCI Express 2nd0 x1
3x PCI
Video:
The need for a separate graphics card
Integrated graphics chip in AMD Series (Llano)
Support for AMD Dual Graphics
Supporting AMD CrossFireX
Audio:
Realtek ALC 887
7th1 HD
LAN:
Realtek 8111
10/100/1000 Mbit/s
Internal interface:
6x SATA III (6 Gbit/s, JBOD, RAID 0/1/10)
1x USB third0 connector
4x USB 20 connector
1 x S/PDIF output connector
External interfaces:
2x USB third0
6x USB 20
1x RJ-45
6 x audio jacks
1x Optical S/PDIF
2x PS/2 (keyboard, mouse)
Power:
1 24pinový EATX power connector
1x 4-pin ATX 12 V power connector
Design:
ATX
Dimensions:
30.5 x 22.4 cm
Included accessories:
CD with drivers and utilities
Anti-virus software (OEM version)
User Manual
2x SATA Cable III
Back Cover
* Memory modules with a frequency of 1866 MHz are supported only when it will be filled in only 2 slots (ie, one module per channel).If you put two modules per channel, and all 4 slots are filled, reduce their speed to the max1600 MHz.