Be quiet! DARK POWER PRO 13 1300W
Be quiet! DARK POWER PRO 13 1300W
The Be quiet! DARK POWER PRO 13 PC power supply provides 1300W of power for high-performance computer builds and workstations. Its fully modular design complies with the ATX 3.0 standard and natively supports PCIe 5.1 connectors, so it is ready for the power spikes of modern graphics cards. It uses digital control and an Active Rectifier + full bridge LLC topology for voltage regulation. The design includes a Silent Wings fan and 80 PLUS Titanium certified components.
1300W
Power
ATX
Format
80 PLUS Titanium
Certification
Fully
Modularity
Key features of the Be quiet! DARK POWER PRO 13 1300W
- 1300W of power meets the demands of high-performance builds
- 80 PLUS Titanium certification confirms efficiency of up to 94.4%
- Fully digital control maintains exceptional voltage stability
- Patented 135mm Silent Wings fan cools components with low noise
- Overclocking key function switches between six and one 12V rails
- ATX 3.0 standard natively supports graphics cards with PCIe 5.1 connectors
- Individually sleeved cables simplify organisation and improve airflow
Choosing a power supply
When choosing a suitable PC power supply, a key parameter besides the format is its power output. This indicates the maximum number of Watts the power supply can continuously deliver to the computer's components. It is a good idea to use a web-based calculator to work out the optimal power based on your chosen components.
Efficiency and digital control
The power supply belongs to the 80 PLUS Titanium certified category. This specification indicates that when converting AC power from the mains to DC for the computer components, the power supply achieves an efficiency of 94.4% at 50% load. Higher efficiency means lower energy losses and less heat generation, which reduces cooling demands and the load on internal components. The digitally controlled Active Rectifier and full bridge LLC technology serves to regulate voltage with low fluctuation and ripple. This voltage rail regulation is important for the stable operation of sensitive components such as processors and graphics cards, especially under higher loads. The digital control also enables a fast response to changes in load.
ATX 3.0 support and quiet operation
Full compatibility with the ATX 3.0 standard means the power supply is designed to handle the short-term power spikes typical of modern graphics cards. It is equipped with two PCIe 5.1 12V-2x6 connectors for powering high-performance graphics cards without using adapters. The power supply delivers energy directly through these cables, which are designed for this type of load. A 135mm Silent Wings fan takes care of cooling. It features optimised blades, a fluid-dynamic bearing (FDB) and a 6-pole motor. These elements are designed for stable operation and lower noise levels. Under normal load, the power supply operates very quietly, and even under higher loads, its noise level remains low.
Overclocking key and modular cables
Advanced users can take advantage of the Overclocking Key. This switch changes the power configuration from the default mode with six separate 12V rails to a single 12V rail mode. This mode is used in situations where high and continuous power draw is required, such as during overclocking. In this setting, power is supplied from a single common rail without being split between multiple lines. The power supply's casing is made of brushed aluminium, which helps with heat dissipation. The design is fully modular and the power supply is equipped with individually sleeved cables that make installation and cable management inside the computer case easier. Tidy cable arrangement can improve airflow and make it easier to access components.
Comprehensive protection
The safety of connected components is ensured by a set of electrical protections. The power supply is equipped with over-voltage, under-voltage, over-current, overload, short-circuit, and over-temperature protection. It also includes SIP (Surge and Inrush Protection), which reacts to current surges from the mains. These protective mechanisms work automatically and serve to reduce the risk of damage to the connected components.
Connectors
- 1× ATX 24-pin
- 2× CPU 8-pin (4+4)
- 6× PCI-E 8-pin (6+2)
- 2× 12VHPWR 16-pin
- 16× SATA 15-pin
- 5× Molex 4-pin
Package contents
- Power supply
- Screws
- Cable ties
- Velcro cable straps
- User manual
- Overclocking key
- 1× Power cable
- 1× ATX 24-pin
- 1× CPU 4+4-pin
- 1× CPU 8-pin
- 2× 12VHPWR 16-pin
- 6× PCI-E 6+2-pin
- 4× SATA
- 1× PATA
- 1× SATA/PATA
80 PLUS certification on the European market
The 80 PLUS certification was created to objectively evaluate the efficiency of computer power supply units. This gives users a simple and clear way to compare different models. On the European market (where a 230V voltage is used), there are six levels of 80 PLUS certification with set requirements for computer power supplies. Higher energy efficiency primarily means lower energy consumption.
| PC PSU load | Efficiency at 20% load | Efficiency at 50% load | Efficiency at 100% load |
|---|---|---|---|
| 80 PLUS | 82 % | 85 % | 82 % |
| 80 PLUS Bronze | 85 % | 88 % | 85 % |
| 80 PLUS Silver | 87 % | 90 % | 87 % |
| 80 PLUS Gold | 90 % | 92 % | 89 % |
| 80 PLUS Platinum | 92 % | 94 % | 90 % |
| 80 PLUS Titanium | 94 % | 96 % | 94 % |
Specifications
Performance and format
Equipment
Efficiency
Connectors
Cooling system
Dimensions
| Code: | BNdpp13a6 |
| Warranty: | 120 months |
| Links: | Producer's Website: |
| Manufacturer information |
Listan GmbH, Wilhelm-Bergner-Str. 11, 21509 Glinde, Germany [email protected] 
|