Flashforge PLA Multicolour 1,75mm 1kg Skydiver
16.90 €
Flashforge PLA Multicolour 1,75mm 1kg Skydiver
The Flashforge filament will serve as a refill for 3D printers. It is designed with the perfect parameters for the perfect printing of every minute detail. You will appreciate its long endurance and the lack of the typically unpleasant filament smell. The Blue colour of this 3D printer filament will stay the same long after printing. Its weight is roughly 1 kg. The nozzle temperature may reach 220 °C while the printing takes place. The temperature of the pad should be set to 60 °C. The Flashforge filament is made out of PLA. The compound PLA is famous due to its high biodegradability, versatility, as well as its quality workmanship. The diameter of the string is 1,75 mm. The diameter's tolerance is 0,02 mm.
Flashforge PLA Multicolour 1,75mm 1kg Skydiver Filament Key Features
- Recommended print speeds with this filament are from 60 to 350 mm/s
- Blue printing filament from Flashforge for 3D printers
- Made of PLA
- Properties of this material: colour changing
- No unpleasant smell and very minimal bubble formation
- Diameter of 1,75 mm is ideal for printing small, light objects
- Total weight of pack: 1 kg
Whole description
Specifications
Colour
Colour
Blue
Material
Material
PLA
Material properties
Colour changing
Dimensions
String diameter
1.75 mm
Diameter tolerance
0.02 mm
Weight
Weight
1 kg
Features
Min. nozzle temperature
190 °C
Max. Nozzle Temperature
220 °C
Min. bed temperature
20 °C
Max. bed temperature
60 °C
Minimum recommended print speed
60 mm/s
Maximum recommended print speed
350 mm/s
Maximum recommended print speed
Over 300 mm/s
Number of pcs per pack
Number of pieces in package
1 pc(s)
All parameters
| Code: | FFfpla056 |
| Warranty: | 24 months |
| Links: | Producer's Website: |