Archive - Work Tools

Cordless Drill without hammer, 18 V, Li-Ion, maximum torque: 40 Nm, motor type: carbonless, chuck range: 13 mm, without battery

Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 40 Nm, motor type: carbonless, chuck range: 13 mm, without battery

Circular Saw - with disc, with power of 800W, 2950RPM, disc diameter of 200mm, cutting depth: 45/27mm

Chainsaw

Heat Gun 2300 W, maximum temperature up to 650 °C, air flow 500 l/min, equipment: thermal protection and temperature regulation

Tacker manual, for buckle length 6-14 mm and 4-10 mm and width 11,3 mm, has the following characteristics: handle lock

Compressor oil-free, input power 120 W, max. pressure 2,8bar, voltage 12V

Angle Grinder , disc diameter: 125mm, max speed: 9000 rev/min, antivibration handle, weight: 2,1 kg

Mitre saw - power: 1400W, 5000 RPM, LED lighting, 216mm × 30mm, weight: 14,2kg

Heat Gun 1800 W, maximum temperature up to 600 °C, air flow 500 l/min, equipment: thermal protection and temperature regulation

Straight Grinder - with power use of 130W, speed control

Rechargeable Battery for Cordless Tools

Angle Grinder , disc diameter: 150mm, max speed: 7500 rev/min, antivibration handle, weight: 2,1 kg

Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 50 Nm, motor type: carbonless, chuck range: 13 mm, with carrying case

Cordless Drill , Li-Ion, maximum torque: 50 Nm, chuck range: 13 mm

Cordless Screwdriver - 7.2V; 2.0Ah battery (2pcs); Charging time: 40min; Idle speed: 0 - 380 min-1; Clamp / drill size: 0.6-6 mm; Max. tightening torque: 12Nm; Carrying case

Impact Wrench aku, mounting type: impact joint 1/2", 1800 rev/min, 1000 Nm torque

Cordless Screwdriver 3,6 V, max. spinning moment 5 Nm

SDS-Plus Rotary Hammer Drill - chuck SDS Plus, 1800 rev/min rated speed, 5100 impact rate per minute, impact energy 2 J, weight 2,3 kg

SDS-Plus Rotary Hammer Drill - chuck SDS Plus, 1800 rev/min rated speed, 5100 impact rate per minute, impact energy 2 J, weight 2 kg

Angle Grinder - cordless, disc diameter 125 mm, max. speed 9800 rev/min, speed control and antivibration handle, requires battery with 18 V voltage, weight 3.3 kg, charger,...

Angle Grinder - cordless, disc diameter 125 mm, max. speed 9800 rev/min, antivibration handle, requires battery with 18 V voltage, weight 2.3 kg, transport case and protective...

Screwdriver - 3 transfers, maximum torque: 15 Nm, double anti-corrosion layer with a hardness of up to 60 HRC, 8 different extensions

Cordless Drill with hammer, 20 V, maximum torque: 50 Nm, motor type: carbonless, chuck range: 13 mm, package includes 2 × 2 Ah batteries, with carrying case