Magigoo Stick for 3D Printing Pro PC
26.90 €
Magigoo Stick for 3D Printing Pro PC
The Magigoo glue stick for 3D printers improves the adhesion of the first layer in 3D printing and makes it easier to remove the print once the print surface has cooled. The stick also helps prevent warping that can occur when using FDM/FFF 3D printers. Magigoo Pro PC is designed exclusively for printing with polycarbonate filaments (PolyMax PC, PolyLite PC, Polymax PC-FR, PC-ABS and others). It is a liquid "adhesive" that is applied to the print bed as a continuous thin film. After printing, you can easily remove any adhesive residue with a damp cloth, preventing unwanted build-up on the print surface. The glue stick lasts for approximately 100 applications and can be used on both heated and unheated print beds.
Key features of the Magigoo Pro PC glue stick for 3D printing
- The Magigoo glue stick improves the adhesion of the first layer in 3D printing
- Designed for printing with polycarbonate filaments (PolyLite PC, Polymax PC-FR, PC-ABS and others)
- Helps prevent warping during printing
- Makes it easier to remove the print once the print surface has cooled
- Apply to the print bed as a thin film
- Water-soluble adhesive is easy to remove with a damp cloth after printing
- One tube lasts for approximately 100 applications
- The Magigoo Pro PC stick can be used on both heated and unheated print beds
Whole description
| Code: | PMD014a5a02 |
| Warranty: | 24 months |