Mikrotik CCR1009-7G-1C-1S+

The CCR1009 switch has been enhanced by a combination of previous customer feedback and best practices for manufacturing devices that manage network traffic. The device now features only fully independent Ethernet ports, each with a direct connection to the CPU allowing to overcome previous shared 1Gbit limitation from switch-chip ports. This opens up the full potential of these ports, as higher throughput is achieved.

Key Features

• 7 x 1GB Ethernet ports
• 10GB SFP + and Combo port
• Manageability (RouterOS Level 6 system and touchscreen)
• Support for Smart card and MicroSD
• Possibility to power the switch via PoE
• Second Redundant Power Supply
• Ready to be installed in a 1U rack

Connect to other SFP + and Combo Ports

The switch is also suitable for backbone and remote connections with the existing network. You can choose an extra fast SFP + (up to 10Gbps) and Combo Port. This switch exclusively supports 100BASE-LX, 100BASE-SX, 100BASE-BX 100BASE and SFP 1.25G standard modules. The combo port has two hardware interfaces - SFP and Gigabit Ethernet,  so you can use the type of connection you have available and not close the door on an upgrade. If the Combo port is disconnected, it provides a failover override function.

Specifications:

Interface:
7 × Ethernet (up to 1Gbps)
1 x SFP + (up to 10Gbps)
1 × Combo SFP ports (up to 1Gbps)
1 x Micro USB
× 1 Serial (RS-232)
1 × micro SD
1 x Smart Card

Consumption:
Max. 34W

Hardware:
CPU: TILE-Gx9 9 cores 1.2GHz
RAM 2GB
NAND: 128MB

Dimensions:
444 × 47 × 175mm