PERENIO Pohybový senzor
PERENIO Pohybový senzor
If you've decided to guard the security of your home with Perenio equipment, we have a new unit you shouldn't miss. It is a motion sensor that will immediately alert you to unauthorized entry into your home. In order to operate the sensor, you need to own a control gateway, which will send alerts to your smartphone. The free Perenio motion sensor management app is available for both iOS and Android.
Key features of the Perenio motion sensor
- An essential accessory for homes guarded by Perenio
- The Perenio control gateway is required to operate the motion sensor
- The sensor responds to the heat of a moving object in the monitored area
- If this happens, the device will send push-notifications to your smartphone
- The free app is available for both iOS and Android operating systems
- The Perenio motion sensor runs on a battery that lasts up to 2 years
- Designed for installation indoors, on a flat vertical surface
Perenio sensor sends a push-notification
You can install the Perenio motion sensor in the interior of any property (house, cottage, office or warehouse) on a flat vertical surface. The device will inform you of its operation via an LED indicator. If it is flashing green, it is connected to the control gateway and in active mode. In case of heat detection from a moving object in the monitored area, a push-notification is sent to your smartphone via the control gateway. The Perenio safety sensor is charged by a single battery, which will need to be replaced after approximately two years of operation.
Communication technology:
ZigBee TO 1.2 (IEEE 802.15.4)
Power supply:
1× CR2450 (600 mAh, 3 V) with a lifetime of up to 2 years
Ddetection:
Angle: 110° ± 10°
distance: 6 m (detection area: 10 m × 6 m at 110°)
technologies: PIR (passive IR sensor)
Light sensitivity:
20 lux min
Installation:
for indoor installation only
on a flat vertical surface
recommended height: 2,0 - 2,6 m
Dimensions:
sensors: 84.4 × 63.4 × 26.3 mm
Weight:
31,9 g
Operating temperature:
0 - 45 °C
Operating Humidity:
10 - 85% (non-condensing)
Specifications
Connection
Connectivity
Use
Input voltage
Battery
Functions and features
Notification
Location
Use
Detection Type
| Code: | PRN21_02 |
| Links: | Producer's Website: |