SONOFF iPlug Wi-Fi Smart Plug (S60 Series) 2-pack

Time switching

Wherever you need to switch an appliance on a regular basis - the Sonoff socket gives you really great timing options. Such sockets are very popular, for example, with aquarists who need to regularly switch lighting, filtration, heating and so on. In addition, Sonoff S60 allows you to use external information (e.g. sunset/sunrise time, weather forecast) and start/stop the appliance based on this data.

Timing option

In addition to the remote control the Sonoff S60 offers many timing options - for example:
– switch on every hour for 5 minutes
– get back together every day for 2 hours
– turn on every Tuesday at 6:00 a.m. and turn off at 9:00 a.m.
– switch on when a Sonoff light, switch, other socket is lit
– shut down in 12 minutes
– buckle up if it starts snowing (via www.ifttt.com)

Remote control

There are situations where remote switching of the appliance is almost a necessity. For example, the heater in the cottage. There's nothing easier than plugging the direct heating into a smart socket and turning the heating on remotely 2 hours before you arrive at the cottage.

Universal Wi-Fi socket Sonoff iPlug S60 with EU/Schuko hybrid plug

The Sonoff iPlug Wi-Fi Smart Plug (S60 Series) combines a hybrid EU Type E/F plug (Czech version) and a Type F socket (so called. German type, "Schuko") in order to achieve maximum universality of use within the European Union and thus reduce production costs. From a safety perspective this combination poses no risk, as older round plugs (forks) without side contacts cannot physically be inserted into this socket. All other plugs that are commonly supplied with appliances today will be properly earthed thanks to the lateral earthing contacts

Technical specifications

Voltage: up to 250 V
Max. tension: 16 A / 3500 W
Recommended long-term resistive load: 2500 W
Recommended long-term inductive load: 350 W
Maximum peak load: 4000 W
Wifi standard: 2.4GHz 802.11 b/g/n
Wifi frequency: 2.412-2.462GHz
Operating temperature: -10 ºC to +40 ºC
Weight: 79 g
Dimensions: 50 x 50 x 61.5 mm
Material: ABS V0 Flame resistant

Warning:
The circuit on which this socket is connected must be protected by a 16A circuit breaker. The socket disconnects the contact on the right side after switching off. The standard CSN 33 2000-4-46 allows the connection of the working conductor on both sides in fixed sockets, however, it is standard in the Czech Republic to connect the "phase" on the left. In this case, it means that even after switching off this socket, there will still be an unconnected phase in the left socket. For this reason, it is not possible to use similar sockets to safely disconnect the appliance. In case of any manipulation of the appliance that could cause electric shock, physically unplug the appliance from the socket