Tenda A30

Reliable wireless AP for easy expansion of your network sharing of broadband Internet access over a wireless network. Supports modes access point connected to the LAN jack, as well as repeater mode Where extend the reach of WiFi signal . Supports wireless standard WiFi 802.11n That makes it possible to transfer data via two antennas at speeds up to 300 Mbit/s .
You will be served a new, ingeniously designed chipset Broadcom BCM5357 codenamed Intensi-fi, which reaches a maximum transmission speed up to 95 Mb/s with a consumption of only 8 Watts ! Dynamically off-chip components, thereby reducing energy consumption.
Supports most powerful WPA2-PSK , The ability to disable broadcast name of your wireless network (SSID) MAC address filtering , Port forwarding and other standard network functions. Content Filtering provides control access to inappropriate websites. Of course, the configuration settings using a web browser before the web interface that is clear and a simple guide in English .
Features and Specifications :
Supported standards:
IEEE 802.11g/b/n
Wireless modes:
AP, WDS Repeater, Repeater
Transfer rate:
Up to 300 Mb/s
Antenna:
2 x 5 dbi
undismountable
Sensitivity:
-87 DBm @ 11 Mb/s
-72 DBm @ 54 Mb/s
-68 DBm @ 270 Mb/s
Output:
<20 dBm (EIRP)
Security:
WPA-PSK, WPA2-PSK, MAC ACL, URL filtering
Network functions:
DHCP Client, WDS, QoS (802.11e WMM)
Chipset:
Broadcom BCM5357
Consumption:
8W
Interface:
1 x RJ-45 10/100 BaseT Fast Ethernet (LAN)
Dimensions:
133 x 87 x 24.7 mm
Weight:
105 g