Tenda W301

The wireless access point supports the latest WiFi standard 802nd11n with transfer speeds up to 300 Mbit/sFair baud rate is about 90 Mbit/s, which is still 6 times more from the previous standard 802nd11g, with which the access point is backward compatible.To maximize the 802nd11n standard, the device is equipped with a Gigabit LAN port.The device can operate in several modes as a classical AP, P2P Bridge, P2MP Bridge and AP Repeater.Reception and signal propagation by two internal antennas on the performance of 2x 3 dBi.Of course there is the strongest support for WPA2 in combination with the 802nd1, the option to disable SSID broadcast, MAC address filter and packet filter.Local and remote management is done via the web interface or using the new SNMP v1 or v2.The device can be powered in two ways - through an Ethernet cable directly support the Power over Ethernet (PoE 802nd3AF) or the included AC adapter.Its use is ideal for home and small to medium businesses and hotels to extend their existing network.Thanks to its design and PoE power device may be mounted on the wall.Mounting kit is included.
Specifications:
Operating modes: Access Point Repeater P2P Bridge P2MP Bridge
Supported wireless network:
IEEE 80211b (11 Mbit/s, 2.4 GHz)
IEEE 80211g (54 Mbit/s, 2.4 GHz)
IEEE 80211n (300 Mbit/s, 2.4 GHz)
Antenna:
Type: Internal
Power: 2x 3 dBi
Output:
20 dBm
Sensitivity:
-92 DBm
Modulation:
DSSS, OFDM
Administration:
Through HTTP
SNMPv2
Security:
WEP
WPA/WPA2
IEEE 8021
Interface:
1x RJ-45 (LAN 1000 Mbit/s)
Dimensions:
145 x 145 x 32 mm (L x W x H)
Weight:
650 g