APC Smart-UPS 1500VA LCD RM

The APC Smart-UPS 1500 VA backup power supply displays important information right on the front panel thanks to the LCD. In addition to that the UPS unit can be conveniently configurated using the navigation keys. Remote unit management support via a computer network is a given. You can also use a USB port or serial interface.

Companies looking for energy efficiency will appreciate the patented operating mode that spans the unused electrical components in good power conditions, and thus achieves very high operating efficiency without any reduction in security. The unit also features the actual number of hours utilized kW, so you can easily check the energy consumption of connected devices. Unwanted loading of the distribution network eliminates active PFC correction. The unit is highly effective; its response rate reaches 97% at full load and thus effectively eliminates unwanted heating. A part of the unit is an independent group of sockets, which you can control independently of the UPS. With their help you can conduct separate restart of connected devices and turn them on or off.

Automatic voltage regulation (AVR) Boost and Trim provides higher application availability by correcting low and high voltage conditions without discharging the battery. The intelligent charging voltage control system saves you money thanks to the battery temperature, which prolongs its life. Regular battery tests ensure early detection of the need for replacement. The unit provides overcurrent surge protection, as well as protection from spikes, lightning, and other power disturbances. It also automatically starts up the connected equipment when power is restored.

Specifications:

Output:
Max Configurable Power: 1000 W/1500 VA
Rated output voltage: 230 V
Rated output voltage can be set to 220, 230 or 240 V
Efficiency at Full Load: 98.3%
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 57 - 63 Hz, 60 Hz nominal

Output Connections:
4x IEC 320 C13
2x IEC Jumpers

Input:
Rated input voltage: 230 V
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connection Type: IEC-320 C14
Input voltage range: for the power grid 160-286 V
The input voltage range can be adjusted to power the grid: 151-302 V

Batteries and Runtime:
Maintenance-free sealed Lead-Acid battery with suspended electrolyte (leakproof)
Typical recharge time: 3 hours
Number of battery modules: 1
Hours of operation: chart for operating time/display the runtime

Communications and Management:
Port Interface: RJ-45 Serial, SmartSlot, USB
SmartSlot Interface Quantity: 1
Control panel: Multi-function LCD status and control console
Audible warnings: Alarm when on battery/distinctive low battery alarm/adjustable time
Emergency shutdown: Optional

Surge Protection and Filtering:
Energy rating: 459 J
Filtration: multi-pole noise filtering/IEEE surge 0.3%/zero response time/corresponds to UL 1449

Design:
Colour: Black
Dimensions: 89 x 432 x 457 mm (H x W x H)
Weight: 28.64 kg

Package includes:
CD with software, Documentation CD, Installation guide, support rails for rack-mounting, Smart UPS RS-232 signaling cable, USB cable