APC Smart-UPS SRT 6000VA 230V

The worst thing that can happen to you when you work on a computer is a power outage a few seconds before your work was about to be automatically saved. The unsaved work is irretrievably lost, and you must start from scratch. Similar heart-stopping situations can be averted by the APC Smart-UPS SRT 6000VA 230V uninterrupted power supply (UPS). This is a large battery that powers all types of electronics. The APC Smart-UPS SRT 6000VA 230V UPS battery backup has the Online with double conversion design approach. Off-line is classified as the most basic form. The line interactive UPS enhances the simpler off-line version of voltage regulation. The most complex variant is the online double-conversion UPS, which provides optimum stable protection against power disturbances.

APC Smart-UPS SRT 6000VA 230V Backup Power Supply Key Features

• Type of backup power supply: Online with double conversion
• Actual performance: 6000 W
• At a 100% load, the UPC will work for 2,5 min
• 6 sockets (C13), as used for monitors, printers, or amplifiers
• 0 Schuko power plugs

The most important parameter is the UPS run time. This is governed by the power consumption of the connected devices – for example, at half-load (50%), the UPS power time will last a longer amount of time. The load of the UPS determines the operating time, which at full load (100%) is 2,5 min and at half the energy consumption, it is 8,7 min. It is therefore crucial to determine the power consumption of the connected electronics and ideally to have some extra power left. The APC Smart-UPS SRT 6000VA 230V shows the apparent power as 6000, but with realistic use, the actual usage matches the value of 6000 W.