Interested in reviews of AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD? It got 4.4 out of 5 stars from our customers. Find specific customer reviews of AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD below. We will appreciate if you also share your experiences with AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD after purchasing.
AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Rated 23/08/2025, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
Appearance
Active fan in the radiator
Instructions, screws, reducer, screwdriver included
Can be used on single/double SSD chips
-+-3-5 degrees more than with a passive from the plate
Tested with Samsung 9100 PRO SSD (PCI-e 5.0 4x NVMe) with Asus TUF GAMING X670E-Plus motherboard
Retrieved from
0 ×Report
Automatic translation
Robin, Kamenický Šenov
Rated 28/06/2025, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase - review from a price comparison website
active cooling even though it looks massive fits just as tall as a PCIe slot
accessories screws cooling pads power cables
so far nothing it shows the time the fan has 5000 rpm at +- 40°C but does not make noise
0 ×Report
Automatic translation
Zdeněk, Dvůr Králové nad Labem
Rated 26/05/2025, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
fulfils its function
0 ×Report
Automatic translation
Viktor, Opava-Zlatníky
Rated 23/05/2025, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
I suspected that for my SSD drive will be better active than passive cooler, but I definitely can not recommend this one, the heat is kept in the cooler and the fan as if it were not there at all, temperatures were jumping in 60 ° C and I had a passive cooler where they were max 50 ° C. I definitely do not recommend this product just because of the price
Nothing
It doesn't cool at all even at full speed it doesn't put air anywhere
price
not usable at all (worse than a passive cooler
0 ×Report
Automatic translation
Tomáš, Praha 4
Rated 02/04/2025, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
To reduce the temperature it is necessary not to apply a "thermal pad" on the top of the disc. Then it cools perfectly
Reduced the temperature in the SFF PC on the disk by about 10 degrees (from 70 to 60)
At about 40% of fan power it is inaudible, hopefully it will remain so after a longer period of use
Socket for 4pin in the package
Significantly better cooling performance than passive coolers in no-airflow SFF PCs
I expected them to lower the temperature more
There is a distinct whistling sound at higher speeds, but that's with any fan this small
0 ×Report
Automatic translation
Jiří, Chrudim 1
Rated 03/09/2024, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
Quality cooling for powerful M.2 SSDs
Temperatures up to 50 °C
Bought for a double sided SSD, almost impossible to fit the top into the holder with the included heat pads. Ideally, add another 0.5 mm washer.
0 ×Report
Automatic translation
Luboš, Příbram 3
Rated 08/07/2024, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase - review from a price comparison website
Its advantage is its size, but it does not cool as well as the AXAGON CLR-M2XL ALUMINUM Heatsink for M.2 SSD. But what to do if there is no room. I would say the noise is minimal.
0 ×Report
Automatic translation
Martin, Praha
Rated 25/02/2024, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
The temperature of the PCI 5.0 SSD is surprisingly up to 70C even without load, the disk connector on the MB has a temperature at least a few degrees higher. The passive heatsink with one heatpipe included with the MB felt cooler. But I don't notice any effect on operation and stability so far.
size
quality of materials and workmanship
very quiet, the fan is virtually inaudible unless you put it to your ear
speed monitoring possible on standard MB connector
need to install carefully and exactly according to the instructions - different procedure for single-sided and double-sided SSDs
the foil on the copper heat sink can be difficult to remove
the cooler is quite low, it would probably fit next to the chart. cards in PCI slot
0 ×Report
Automatic translation
Jakub, Plumlov
Rated 08/02/2024, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
Temperature reduction compared to the data SSD by about 5 st. C
0 ×Report
Automatic translation
Anonymous customer
Rated 13/11/2023, variant AXAGON CLR-M2FAN COPPER Heatsink with FAN for M.2 SSD
Verified purchase
Cools incredibly
simple wiring
pleasant appearance
It is a bit noisier when the PC starts up but it levels off after a while.
0 ×Report
Automatic translation
Try our cookies
Alza.cz a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
