Creality 1.75mm ST-PLA / CR-PLA 1kg grey
14.90 €
Creality 1.75mm ST-PLA / CR-PLA 1kg grey
The CREAlity filament is a refill for 3D printers. It is designed with the perfect parameters for the perfect printing of every minute detail. You are sure to appreciate its long endurance and the absence of the unpleasant smell typical of such filaments. The Grey colour of this 3D printer filament will keep a long time. Its weight is about 1 kg. The nozzle temperature may reach up to 230 °C while the printing takes place, and the temperature of the pad should be set to 60 °C. The CREAlity filament is made of PLA. Polylactic acid is known due to its biodegradability and versatility and quality workmanship. The diameter of the filament is 1,75 mm, and the tolerance of the diameter is 0,02 mm.
Creality 1.75mm ST-PLA / CR-PLA 1kg grey Filament Key Features
- Recommended print speeds with this filament are from 40 to 60 mm/s
- Grey printing filament from CREAlity for 3D printing
- Filament strand length: 340 m
- Made out of PLA
- Material properties: PLA+
- No gross smells and low bubble formation
- Diameter of 1,75 mm is ideal for printing small and light objects
- Total weight of the packaging is 1 kg
Whole description
Specifications
Colour
Colour
Grey
Material
Material
PLA
Material properties
PLA+
Dimensions
String diameter
1.75 mm
Diameter tolerance
0.02 mm
Roll length
340 m
Weight
Weight
1 kg
Features
Min. nozzle temperature
190 °C
Max. Nozzle Temperature
230 °C
Max. bed temperature
60 °C
Minimum recommended print speed
40 mm/s
Maximum recommended print speed
60 mm/s
Maximum recommended print speed
Up to 60 mm/s
Number of pcs per pack
Number of pieces in package
1 pc(s)
All parameters
| Code: | CRFa13 |
| Warranty: | 24 months |
| Links: | Producer's Website: |