AL-KO Submersible Pressure Pump Dive 5600 /44

The AL-KO DIVE 5600/44 Automatic submersible pressure pump is equipped with a four-stage drive and a 1200W motor. It can operate at a submersion depth of up to 7 metres and provides a delivery head of up to 44 metres. The maximum flow rate is 5,600 litres per hour, maintaining stable pressure and a high flow rate. It weighs approximately 11kg and is equipped with a 10m power cable. The integrated handle allows for both stationary and mobile use. The pump body, filter screen and shaft are made of non-corrosive stainless steel, which guarantees easy maintenance. The sealing system consists of a ceramic seal capable of withstanding pressures of up to 4 bars and three additional lip seals to prevent water from entering the motor. The pump also includes a special channel for pressure relief in the event of a minor leak. It is designed to operate in a horizontal position, with a specially shaped handle preventing unwanted rotation.

The AL-KO pump has a wide range of uses

The automatic operation and shut-off of the AL-KO pump is enabled by an electronic pressure switch. The integrated electronics provide dry-run protection and a built-in low-volume programme protects the system against any leaks in the pressure hoses. A 1.5" diameter hose can be attached to the pump outlet, and it also has a one-inch connection for mounting a floating suction system, which is used to draw clean water from the upper part of the tank. It is suitable for pumping out containers, pumping service water from wells or shafts, supplying sprinklers, supplying extensive irrigation systems or for automatic water distribution in the household. The AL-KO DIVE 5600/44 pump can handle impurities with a grain diameter of up to 0.5mm and is intended exclusively for service water or chlorinated pool water up to a temperature of 35°C.