PremiumCord DVI repeater up to 50m

The PremiumCord DVI signal amplifier is suitable for extending the usable distance of the DVI cable. Depending on the cabling used, it extends the possibility of a 30-50 meter lead.
Parameters and Specifications:
Properties:
DVI Signal Amplifier
Support for HDCP and DVI-I
Complies with the DVI 1.0 specification
It is necessary to engage in order: PC - cable - repeater - device
Automatic alignment up to 40 dB at 825 MHz (1.65 Gb / s) without the need for system control
Compatible resolution:
TV: 480i, 480p, 720i, 720p, 1080i and 1080p
Computer: VGA, SVGA, XGA, SXGA, UXGA
It is important to have the correct cable type, vein thickness !!!!
It extends with the lengths:
a. 0 to 50 m DVI cable, 24 AWG STP (Shielded-Twisted Pair)
b. 0 to 36 m DVI cable, 28 AWG STP (Shielded-Twisted Pair)
c. 0 to 30 m DVI cable, 30 AWG STP (Shielded-Twisted Pair)
Note:
The DVI repeater can be connected ONLY at the end of the cable to the target device. NEVER connect it directly to the signal source (e.g. right behind the computer).