Seagate IronWolf 1TB

The Seagate IronWolf 1TB hard drive is one of the high load internal HDDs for NAS storage solutions. 3.5" HDDs are made chiefly for desktop computers and data centres. One of the key parameters is clearly the rotational speed. The 5400 rev/min RPM should satisfy most typical users. You can look forward to a total data capacity of 1000 GB. The drive features a 256 MB memory cache. All the data communication between the Seagate hard disk and other hardware is takes place via the SATA III interface.

Seagate IronWolf 1TB Hard Disk Key Features

• 256 MB memory cache
• Seagate 3.5" disk fits into classic larger bays
• Standard power consumption is 3,1 W, while in stand-by mode it makes 2.8 W
• You can connect it to a PC or other devices via the SATA III interface

Other HDD Features

The HDD boasts a unique design. Inside the drive there is a mechanism that uses moving platters accompanied by hard disk heads that facilitate reading and writing of data. These mechanical parts are admittedly more sensitive to shocks, but at the same time you get a great combo of a low price and great storage capacity. The key criterion that determines the speed of a platter hard disk is the number of revolutions per minute (RPM). In case of the Seagate IronWolf 1TB, you get 5400 rev/min RPM. This is a popular option for ordinary home computers and other devices that do not require high performance. System responsivity and overall stability is also determined by the disk buffer, usually called cache. The Seagate HDD is equipped with a 256 MB cache that keeps the last written data for their fast retrieval and reading.

Connecting the Seagate HDD

If you want to install the Seagate IronWolf 1TB in your laptop or other device, you need a 3.5" slot. Data sharing is done using the SATA III interface with a standard speed of 6 Gbit/s. The technology ranks among the best HDD data transfer options available and delivers a speed of 600 MB/s.