Solight wireless doorbell, for socket, 120m.

The Solight wireless doorbell's white design with clean lines is unobtrusive and elegant, while blending in subtly with most interiors and not disturbing the overall look of the room. The wireless doorbell just plugs into a regular wall outlet, no drilling or pulling cables required. A range of up to 120 metres in open areas ensures trouble-free operation. The doorbell offers a choice of 48 melodies, 4 volume levels. The "learning code" encoding allows you to add multiple bells or buttons to a group and eliminates interference from other bells in the vicinity.

Ringer connection:
Plug into a 230 V AC power socket.

Connection and installation of the transmitter:
Press the flathead screwdriver into the joint on the short side and open the back cover. Using your finger or a flathead screwdriver, release the latch also on the short side and tip the inner cover to the side. Open the seal protecting the battery from moisture penetration. Replace 1 x 12V (LR23A), taking care to observe the marked polarity. Then close the gasket and both covers carefully. Before attaching the transmitter, make sure the wireless connection is working properly where you want to use it. The transmitter is waterproof and can be placed outdoors. Prefer a place protected from water and excessive heat. The transmitter can be mounted on the pad using double-sided self-adhesive pads or screws with dowels, without or with a protective canopy.
Warning:
Prevent improper handling of this appliance and always follow the electrical appliance usage policy. Designed for use in the home or indoors. Do not expose the receiver (doorbell) to environments with high humidity (e.g. bathroom), avoid contact with liquids.

Power button:
1× 3V CR2032 battery (included)
Power bell:
AC 230 V - for socket

Operating temperature button:
-10 °C to +40 °C