Chladiič Akasa Cooler Master Eclipse
Show alternatives
Product accessories
Don't like the alternatives?
Choose from the full offer
Chladiič Akasa Cooler Master Eclipse
Unique procesorový radiator with non-traditional structures equipped with technology HeatPipe, which guarantees high-quality heat removal.Special fan size 66 x 68 mm at speeds of up to 3300 revolutions per minute is designed to ensure maximum air flow at low levels of noise.It is located between the ribs coolers, which are made of aluminium.Base to ensure contact with the processor is of copper and is linked to žebrovanou parts of four heatpipe tubes.Top of the cooler is equipped with cappings, which allows air circulation around the change cooler.Fan is powered by 12 volts through the 4-pin connector and operates in three modes:Silent - 1800 RPM, Performance - 3300 RPM, and PWM - from 900 to 3000 RPM.Cooler is very quiet and the quality deposits reached its lifespan to 40 000 hours.
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported slot: Intel LGA775 AMD Socket 754, 939, 940, AM2, F
Supported processors:
Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D
AMD Athlon64 FX, Athlon 64, Athlon64 X2 Dual Core, Sempron
Material:
Ribs:Aluminium
Starting a heatpipe:copper
The size of the fan:
66 x 68 mm
Speed speeds:
900 to 3300 rev./ min.
Airflow:
39.8 CFM (max.)
Noise:
17 dB (min.)
24 dBA (average)
Power:
12 volts
4-pin connector
Life fan:
40000 hours
Size:
147 x 146 x 110 mm
Weight:
670 g
Operating modes:
Silent:1800 RPM
Performance:3300 RPM
PWM:900 to 3000 RPM
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported slot: Intel LGA775 AMD Socket 754, 939, 940, AM2, F
Supported processors:
Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D
AMD Athlon64 FX, Athlon 64, Athlon64 X2 Dual Core, Sempron
Material:
Ribs:Aluminium
Starting a heatpipe:copper
The size of the fan:
66 x 68 mm
Speed speeds:
900 to 3300 rev./ min.
Airflow:
39.8 CFM (max.)
Noise:
17 dB (min.)
24 dBA (average)
Power:
12 volts
4-pin connector
Life fan:
40000 hours
Size:
147 x 146 x 110 mm
Weight:
670 g
Operating modes:
Silent:1800 RPM
Performance:3300 RPM
PWM:900 to 3000 RPM
Whole description
| Code: | CA195 |
| Links: | Producer's Website: |